water

Part of the Tru-Blue Promise, BioGuard SilkGuard Complete Tablets are a revolutionary product exclusive to BioGuard.

These chlorine tablets differ from traditional chlorine because the SilkGuard Technology softens the water by attaching to hard water components and metal surfaces. This in turn protects your pool surface and equipment from scale, corrosion and staining, all while killing bacteria.

SunShield Technology offers protection from the sunlight while the SmartGuard Technology helps the tablets last longer than traditional chlorine tablets. Finally, your pool benefits from the algae killing crystals that help stop algae before it starts.

Water Sanitizer

Watch this video to learn more about these tablets.

BioGuard’s SilkGuard Complete™ enhanced with SilkGuard® Technology keep pool water sanitized and velvety smooth.

SilkGuard Tabs :

  • Kill bacteria
  • Control algae
  • Slow-dissolving sanitizers
  • Contain SunShield® Technology so that chlorine is protected from sunlight for long-lasting sanitization of pool water

Usage Recommendations

Routine Maintenance:

  • 16 oz per 10,000 gallons of water per week, or as needed.

Add 16 ounces of this product (approximately 2 tablets) per 10,000 gallons of pool water per week, or as often as

SilkGuard Complete Tablets

needed, to the floater or feeder to maintain a constant free available chlorine level of 1-4 ppm. Sunlight, rainfall, temperature, number of swimmers, and frequency of pool use affects the rate of chlorine residual loss so check the floater or feeder often and refill as needed.

Start Up:

  • 16 oz per 10,000 gallons of water.

If water is cloudy or green, super chlorinate pool with appropriate shock product until pool is clear. Add 16 ounces of this product (approximately 2 tablets) per 10,000 gallons of pool water to feeder or floater. Adjust the feeder or floater following manufacturer’s instructions to establish a fee available chlorine level between 1-4 ppm. Allow water to circulate at least 4 hours and then test for the free available chlorine level. When the free available chlorine level is adjusted to 1-4 ppm, add the preventative algicide appropriate to your needs.