The BioGuard 3-Step System

The BioGuard 3-Step System

We think pool care should be easy, and with the BioGuard  3-Step program, it is just that. Keep your pool sparkling clear by following three easy steps. We look at traditional chlorine pools and salt pools in this article.

For Traditional Chlorine Pools

BioGuard’s 3-Step Care System is ideal for:

  • Pools of any size or surface type
  • Pools that use chlorinators or skimmers with proper water flow
  • Pump circulation 10 to 24 hours per day

Step 1: Sanitize to clean water

BioGuard’s SilkGuard Complete™ Tabs and SilkGuard Complete™ Sticks enhanced with SilkGuard® Technology keep pool water sanitized and velvety smooth. They are available in 3″ tabs, 1″ tabs and sticks.

SilkGuard Tabs and SilkGuard Sticks:

  • Kill bacteria
  • Control algae
  • Slow-dissolving sanitizers
  • Contain SunShield® Technology so that chlorine is protected from sunlight for long-lasting sanitization of pool water

Step 2: Shock to remove contaminants

Keep pool water clear with BioGuard Smart Shock®.

  • Kills bacteria
  • Kills algae; contains blue algae-fighting crystals
  • Clarifies the water using a filter enhancer
  • Buffers pH to provide brilliantly clear water with no cloudy residue and without increasing pH
  • No need to pre-dissolve

Step 3: Algae killing and prevention

Prevent algae before it starts with Algae Complete™.

  • BioGuard’s most complete and best preforming algicide
  • Dual active ingredients to both prevent and kill algae
  • No need to pre-dissolve
  • Non-staining and non-foaming

For Salt Pools

Saltwater pools are favored for their simpler and gentler approach to pool care, but they do have some unique needs when compared to traditional chlorine pools. BioGuard offers two unique pool care programs that enhance the saltwater experience.

Look to a certified salt pool expert

A Certified Salt Pool Expert (like us!) has been trained to understand exactly what is needed to keep a salt pool performing at peak condition. We  understand why you chose a salt pool in the first place and will work hard to maintain your satisfaction with that choice.

The Mineral Springs Program

The Mineral Springs system utilizes easy-to-apply minerals and a chlorine generator to produce a chlorine sanitizer. It takes only five minutes a week to maintain – in fact, once you’ve begun the system, you only have to add the Renewal® product once a week. That’s it!

BioGuard’s Mineral Springs Program is ideal for:

  • Pools equipped with any chlorine generator
  • Frequent travelers or vacation-takers
  • Those looking for the luxuries of a mineral pool
  • Pools of any size or surface

Two easy steps!

Beginnings® – A proprietary blend of minerals added to pool water at start-up

Renewal® – Replenish mineral levels and adjust pH, keeping water soft and clear

Accessories

Stain and Scale – Stain and Scale protects your pool and equipment from scale formation

SaltScapes® Saltwater Pool Care

SaltScapes Saltwater Pool Care was designed specifically for saltwater pools and provides everything you need to keep your saltwater sparkling and protect your equipment and pool surfaces. It adds the basic prevention and remedy solutions that saline generators require with an eye to keeping maintenance requirements to a minimum.

BioGuard SaltScapes Saltwater Pool Care is ideal for:

  • Those looking for “salt-specific” products intended for use in saltwater pools only
  • Easy maintenance and treatment of salt pool needs
  • Pools equipped with any chlorine generator and pools of any size or surface