Natural Chemistry Spa Pipe Cleanse™
Clean your spa plumbing with ease with Natural Chemistry Spa Pipe Cleanse™!
This powerful cleaner flushes out your hot tub’s (and jetted bath’s) plumbing and jets! This fierce product restores
normal flow and improves your overall spa operation and health! Say goodbye to clogged filters, dirty water lines, odors, and foaming after JUST ONE application.
Purge Your Plumbing
Pipe Cleanse attacks the root cause of most spa maintenance problems, which is the buildup of non-living organic waste contamination.
Oils, lotions, cosmetics, hair products, and other non-living organics build up in your spa water and produce cloudiness, unpleasant odors, and foaming. These contaminants collect and build up in circulation systems and filters.
By purging the spa plumbing, you can improve water clarity and reduce the amount of time and effort needed to maintain your spa.
- Helps clean non-living organic waste from inside spa plumbing using a concentrated formula with SMARTZyme technology
- Attacks the root cause of maintenance problems caused by non-living organic contamination
Instructions
Spas/Hot Tubs:
1. Remove cartridge filter elements.
2. With spa water temperature at 95ºF or higher and circulation running, add the entire contents of the bottle to spa water.
3. Run jets for a minimum of 5 minutes.
- Note: If foaming becomes excessive, turn the jets off. Some foaming is expected during the cleanse process.
4. Maintain water temperature at 95ºF and allow the spa to circulate overnight with jets off.
5. Drain and rinse/clean out the surfaces of the spa. Refill the spa water and reinstall the filter elements.
6. Proceed with normal spa maintenance.
For Jetted Tubs:
- Fill the tub with hot water 1″ above the jets.
- Add 1/2 bottle of Pipe Cleanse.
- Turn jets on for five minutes (some foaming will occur).
- Turn the jets off and let sit for at least five hours.
- Turn jets on to flush the system.
- Drain tub & clean surface as needed.
